Fluoride and Taste, Odour, Chemicals, and Sediment whole house filtration with this double Doby setup - removes fluoride and improves taste and odour while also removing chemicals and sediment from your mains water supply.
When fitting allow for a minimum of H 72cm x W 30cm x D 18cm.
Your kit will include:
- 1 x 20 inch big blue filter housing
- 1 x white housing bracket
- 1 x Activated Alumina cartridge for fluoride reduction
- Either 1/2 for 15mm or 3/4 for 22mm ports
- 2 x Isolating flexis (no need for extra ball valves)
- 1 x double check valve - either 15mm or 22mm
- 1 x housing spanner
- Fitting instructions for your plumber
Cartridge details:
- 1 x 4.5'' x 20" activated alumina fluoride removal filter cartridge
- 20 micron
- Temperature range 40°F (4°C) to 100°F (38°C)
- Pressure range 25 psi (1.7 bar) to 100 psi (6.9 bar)
- Capacity 10,000 mg/l
- Flow rate - 15 lpm / 3 gpm
- Reduction ability - 10ppm to <0.2ppm (93% reduction)
Do you have to install a mains water filter under the sink?
No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location.
* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.
