Rozybakiev Street 289, Almaty

Doby TMF Filter

Fluoride, Metals and taste, odour, chemicals and sediment (TOCS) filtration with this double Doby mains water filter system.

Stage one removes fluoride then stage two filters metals and improves taste and odour while also removing chemicals from your cold water tap supply.

The Doby is a whole house water filter and when fitting allow for a minimum of 28" (72cm) height x 24" (60cm) width x 7" (18cm) depth.

Your kit will include:

  • 2 x 20 inch big blue filter housings
  • 1 x white double housing bracket
  • 1 x 4.5 x 20" GAC/KDF cartridge for removal of heavy metals and chemicals and to improve taste and odour of your mains water.  
  • 1 x 4.5 x 20" Activated Alumina cartridge for fluoride reduction
  • Either 1/2 for 15mm or 3/4 for 22mm ports
  • 2 x Isolating flexis (no need for extra ball valves)
  • 1 x double check valve - either 15mm or 22mm
  • 1 x housing spanner
  • Fitting instructions for your plumber

Cartridge details:

  • 1 x 4.5'' x 20" activated alumina fluoride removal filter cartridge
  • 10 micron
  • Temperature range 40°F (4°C) to 100°F (38°C)
  • Pressure range 25 psi (1.7 bar) to 100 psi (6.9 bar)
  • Capacity 10,000 mg/l
  • Flow rate - 15 lpm / 3 gpm
  • Reduction ability - 10ppm to <0.2ppm (93% reduction)

and 

  • 1 x 4.5 x 20" canister containing GAC/KDF filter medium (GAC10N/KDF-BOM)
  • 5 micron
  • 24,000 gallons @ 2.0gpm or 12 months; whichever comes first
  • Certified NSF/ANSI standard 42 NSF
  • Certified by ISO 9001
  • Performance tested and verified by independent laboratory testing

What order do the cartridges go in?

In most circumstances the lowest micron rated cartridge goes last in the sequence (on the water out side). For the Doby Taste, Metals and Fluoride mains water filter the 5 micron GAC/KDF cartridge goes first in the sequence, followed by the 10 micron activated alumina cartridge.

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location.

Doby Taste and Fluoride Filter

Fluoride and Taste, Odour, Chemicals, and Sediment whole house filtration with this double Doby setup - removes fluoride and improves taste and odour while also removing chemicals and sediment from your mains water supply.

When fitting allow for a minimum of H 72cm x W 60cm x D 18cm.

Your kit will include:

  • 2 x big blue filter housing
  • 1 x white housing bracket
  • 1 x 5 micron activated carbon block cartridge (Watts WCBFF20). 
  • 1 x Activated Alumina cartridge for fluoride reduction
  • Either 1/2 for 15mm or 3/4 for 22mm ports
  • 2 x Isolating flexis (no need for extra ball valves)
  • 1 x double check valve - either 15mm or 22mm
  • 1 x housing spanner
  • Fitting instructions for your plumber

Cartridge details:

  • Watts WCBFF20 coconut shell carbon block filter cartridge for chlorine, taste, odour and sediment reduction.
  • 5 micron / 4.5 x 10"
  • Outperforms GAC cartridges as it has superior chlorine reduction (up to 99%), lower pressure drop, will not channel and costs less than a GAC cartridge.
  • Media wrap between centre tube and carbon block to reduce carbon fines.
  • 100% coconut shell carbon.
  • FDA grade components and materials.
  • Recommended  max flow rate - 25 Lpm / 7 gpm
  • Maximum operating pressure: 125 PSIG
  • Operating temperature: 10°C - 52°C / 50°F - 125°F
  • Chlorine reduction - >220,000 litres / 55,000 Gal @ 20 litres per minute / 4 gpm.
  • Tested and certified under NSF / ANSI standard 42 for materials only.

Please note that on the occasions where we do not have the Watts WCBFF20 in stock another compatible high quality cartridge may be used in the kit.

and 

  • 1 x 4.5'' x 20" activated alumina fluoride removal filter cartridge
  • 10 micron
  • Temperature range 40°F (4°C) to 100°F (38°C)
  • Pressure range 25 psi (1.7 bar) to 100 psi (6.9 bar)
  • Capacity 10,000 mg/l
  • Flow rate - 15 lpm / 3 gpm
  • Reduction ability - 10ppm to <0.2ppm (93% reduction)

What order do the cartridges go in?

In most circumstances the lowest micron rated cartridge goes last in the sequence (on the water out side). For the Doby Taste and Fluoride mains water filter the 5 micron carbon block cartridge goes first in the sequence, followed by the 10 micron activated alumina cartridge.

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location.

Doby M - whole house taste and metals filtration

Heavy metals (lead),  taste, odour, chlorine, and sediment filtration with this single Doby setup - removes metals and improves taste and odour while also removing chemicals and sediment from your cold water tap supply.

 

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location. 

 

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.

Doby Fluoride Filter

Fluoride and Taste, Odour, Chemicals, and Sediment whole house filtration with this double Doby setup - removes fluoride and improves taste and odour while also removing chemicals and sediment from your mains water supply.

When fitting allow for a minimum of H 72cm x W 30cm x D 18cm.

Your kit will include:

  • 1 x 20 inch big blue filter housing
  • 1 x white housing bracket
  • 1 x Activated Alumina cartridge for fluoride reduction
  • Either 1/2 for 15mm or 3/4 for 22mm ports
  • 2 x Isolating flexis (no need for extra ball valves)
  • 1 x double check valve - either 15mm or 22mm
  • 1 x housing spanner
  • Fitting instructions for your plumber

Cartridge details:

  • 1 x 4.5'' x 20" activated alumina fluoride removal filter cartridge
  • 20 micron
  • Temperature range 40°F (4°C) to 100°F (38°C)
  • Pressure range 25 psi (1.7 bar) to 100 psi (6.9 bar)
  • Capacity 10,000 mg/l
  • Flow rate - 15 lpm / 3 gpm
  • Reduction ability - 10ppm to <0.2ppm (93% reduction)

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location.

 

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.

Moby M - Metals Mains Water Filter

Our single Moby mains water filter for the removal of heavy metals.

When fitting your mains water filter please allow for a minimum of H 38cm x W 30cm x D 18cm.

For greater capacity to remove chlorine and chemicals you'll need our Moby TM.

Your kit will include:

  • 1 x big blue filter housing
  • 1 x white housing bracket
  • 1 x 4.5 x 10" GAC/KDF cartridge for heavy metals removal
  • Either 1/2 for 15mm or 3/4 for 22mm ports
  • 2 x Isolating flexis 
  • 1 x double check valve - either 15mm or 22mm
  • 1 x housing spanner
  • Fitting instructions 

Cartridge details:

  • 1 x 4.5 x 10" canister containing GAC/KDF filter medium (GAC10N/KDF-BOM) for heavy metals removal.
  • 5 micron
  • 12,000 gallons @ 2.0gpm or 12 months; whichever comes first
  • Certified NSF/ANSI standard 42 NSF
  • Certified by ISO 9001
  • Performance tested and verified by independent laboratory testing

Do you have to install a mains water filter under the sink?

No, you don't. You can install your mains water filter wherever the cold water supply enters your house. This could be a utility room, garage, or other location. 

* Watts components are sometimes replaced with other similar quality items due to supply chain issues. Brassware and other plumbing accessories are sourced from UK suppliers.

Image
 Juice filtration system is used for the filtration, clarification, debitterizing and concentration of fruit juice and other liquids. It can be applied in apple juice, grape juice, pomegranate juice, red plum juice, tomato juice, mulberry juice, orange juice, watermelon juice, haw juice and various vegetable juice.